2022

Momentumheader2023 Scaled

January 2023

A2024-RAM2 fatigue properties are examined for industrial production qualification The recent Science Direct article titled “Microstructure and Fatigue Properties of Al2024-RAM2 Aluminum Alloy Obtained by Laser Powder Bed Fusion” disseminates their fatigue testing results and findings...

2022 Momentum Newsletter

December 2022

Wrapping up 2022 with two in-depth video podcasts   Video Podcast #1 AM Voices chats with our Founder and President of Elementum3D, Dr Jacob Nuechterlein and Director of Business Development, Alex Janzen. They speak...

2022 Momentum Newsletter

November 2022

PRESS RELEASE Elementum 3D enters material development agreement with SLM Solutions   Lübeck, Germany – November 29th, 2022. Metal-based additive manufacturing requires a need for collaboration between hardware OEMs and material providers to work...

2022 Momentum Newsletter

October 2022

Elementum 3D joins NASA and 3D Systems in AM Copper webinar – Register Now! We invite our readers to attend Deep-Tech Showcase’s “Pushing the Limits of Copper in Additive Manufacturing” webinar on Wednesday, November...

2022 Momentum Newsletter

September 2022

REM Surface Engineering – The surface finish experts REM Surface Engineering and Elementum 3D first crossed paths at Rapid+TCT in 2018. Justin Michaud, President and CEO of REM, attended a talk given by Jacob...

2022 Momentum Newsletter

August 2022

Army & Navy STTR Phase I projects kick-off Elementum 3D recently began work on an Army STTR project that partners with Georgia Tech and Addiguru to improve the reliability of large-format cold spray additive...

2022 Momentum Newsletter

July 2022

Corporate culture grows in the mud On July 24, Elementum 3D employees teamed up to test their limits physically and mentally at the “Tough Mudder” event located in Byers, Colorado. This was the third...

2022 Momentum Newsletter

June 2022

New fatigue report proves A7050-RAM2 outperforms 7050 wrought Elementum 3D’s A7050-RAM2 aluminum alloy, developed specifically for additive manufacturing, recently completed room temperature fatigue testing, and is shown below together with 7050 wrought aluminum alloy...

2022 Momentum Newsletter

May

High-performance metal 3D printing alloys take hold at Rapid+TCT For Elementum 3D, this year’s Rapid+TCT event marked a transition from needing to educate the industry about our patented reactive additive manufacturing (RAM) technology and...

2022 Momentum Newsletter

April

Elementum 3D secures DARPA funding to develop printing process for rhenium metal Elementum 3D has been awarded a Direct to Phase II SBIR contract from DARPA to develop a robust, economical additive manufacturing (AM)...

2022 Momentum Newsletter

March 2022

SAVE THE DATE: 3D Printing + Aluminum Webinar Register Now Elementum 3D invites you to attend its one-hour co-hosted “Bridging the Gap” webinar on Wednesday, April 27, at 11am (EDT). The third installment of...

2022 Momentum Newsletter

February

Elementum 3D materials under the microscope The impact and advantages of Elementum 3D’s investment in a state-of-the-art Scanning Electron Microscope (SEM) are already paying dividends to our customers. The Phenom ParticleX SEM optimizes our...

2022 Momentum Newsletter

January 2022

A6061-RAM2 and GRCop-42 processes expanded to new AM systems A6061-RAM2 printing material parameters are being developed for 3D Systems’ DMP Flex 350 platform. Their Application Innovation Group is supporting customers like NASA Goddard Space Flight Center...