Our 10,000 sqft facility contains equipment which makes it possible to research and develop a wide range of innovation hi-tech ceramic and metal additive manufacturing composites. These powdered composites are developed for the DMLS process.
Additive Manufacturing Equipment
Metal & Plastic Printers, 40W Laser Sintering R&D Equipment
EOS M400/ M290 (2)
The Benchmark for the Additive Manufacturing of High-Quality Metal Parts - with Enhanced Quality Management Features
PP3DP UP! Mini
Fabricates objects from STL files using ABS or PLA thermoplastic filament. Builds objects to maximum dimensions of 4.75 x 4.75 x 4.75 inch. /120 x 120 x 120 mm (H x W x D).
Features a high-quality 3D mode for Sintering R&D and is capable of creating 3D designs.
Microscopes, Hardness Tester, Sand Blasting Cabinet
Used in micromanipulation
applications, and in metallurgical applications where polished samples can be placed on top of the stage and viewed from underneath using reflecting objectives.
Inverted Stage Microscope
Designed for low magnification observation of a sample, typically using light reflected from the surface of an object rather than transmitted through it.
Working Area (HxWxD) 550 x 850 x 550 mm,
side Entrance Door and Recovery Chute.
Hardened steel and hard alloys are tested with our Rockwell hardness tester, using a 120 degree diamond penetrator.
Rockwell Hardness Tester
Fume Hoods, Chemicle Cabinets, Clean Bench, Glove Boxs, Lab Press, Furnace
A local ventilation device that is designed to limit exposure to hazardous or toxic fumes, vapors or dusts.
Nano Fume Hood
Includes a one-stamped stainless
steel interior, 99.999% ULPA
exhaust filter and patented Clean-Sweep air foil. Dimensions: 48.0" w
x 29.1" d x 38.3" h.
Flammable chemical and acid / corrosive chemical storage cabinets for all safety cabinet purposes.
A clean bench provides protection for our samples and processes.
Double Glove Box
Designed for handling both hazardous substances and atmosphere-sensitive materials. A double glove Box offers us twice the working width.
Designed for use in controlled atmospheres or for use with hazardous materials and provide a leak-tight environment
Carver Lab Press
This hydraulic press is used for R&D.
This furnace can be programmed, and the temperature will increase automatically, with an accuracy of temperature controlling:±1C.