The widespread commercial adoption of additive manufacturing technologies, commonly known as 3D printing, is no surprise to design engineers at NASA’s Marshall Space Flight Center in Huntsville, Alabama whose research
Breaking new ground in automotive innovation, McLaren has teamed up with California-based Divergent Technologies in a multi-year collaboration. The duo will use additive manufacturing for vehicle design and production, focusing
NASA’s investment in a breakthrough superalloy developed for the extreme temperatures and harsh conditions of air and spaceflight is on the threshold of paying commercial dividends. The agency is licensing
America Makes, the Manufacturing Innovation Institute (MII) based in Youngstown, Ohio, has announced IMPACT (Improvement in Manufacturing Productivity via Additive Capabilities and Techno-Economic Analysis) 2.0, a project call which will
The National Center for Defense Manufacturing and Machining (NCDMM) and America Makes have announced the winners of the $5.75 million Proliferation of Additively Manufactured (AM) Material Datasets project. In alliance
NASA recently built and tested an additively-manufactured – or 3D printed – rocket engine nozzle made of aluminum, making it lighter than conventional nozzles and setting the course for deep
In a sport where speed, weight reduction, and development cycles are key, it’s no wonder why 3D printing and F1 get on like a house on fire. Each year, the
WASHINGTON — A 3D printer onboard the amphibious ship Bataan (LHD-5) may have just saved the Navy a lot of money on an otherwise costly repair, and the service’s chief
![the Biden administration issued an “Executive Order on Federal Research and Development [R&D] in Support of Domestic Manufacturing and United States Jobs.”](https://www.elementum3d.com/wp-content/uploads/2023/07/made-in-america-07312023.jpg)
On July 28, 2023, the Biden administration issued an “Executive Order on Federal Research and Development [R&D] in Support of Domestic Manufacturing and United States Jobs.” The policy outlines a
Following a decade-old trend, the AM sector continues producing exciting startups across a wide range of verticals. From medicine to aerospace, the sector seeks to disrupt its share of industries.
The 3D Printing Industry Awards 2022 shortlists are now available for voting. Who will win the 2022 3DPI Awards? Have your say by casting your vote now. Wire 3D printing
Dr. Erhard Brandl, Head of the Audi Additive Manufacturing Center explains why the revolution of AM is already happening in the development stage. The best part of speaking with real
Global engineering technologies company Renishaw has collaborated with Welsh bespoke bike manufacturer Atherton Bikes to help develop its in-house additive manufacturing (AM) processes. Members of the Atherton family are World
Leaders from across the 3D printing industry have hailed the potential of President Joe Biden’s AM Forward program to drive the technology’s wider adoption. Launched last week, the initiative is
NASA has selected 12 companies to provide commercial launch services for the agency’s Venture-Class Acquisition of Dedicated and Rideshare (VADR) missions, with contracts totaling $300 million. The list includes big-league
*This article featuring Elementum 3D was published on BizWest – Boulder Valley/Northern Colorado on January 12, 2022 By Christopher Wood ERIE — An Erie-based company that develops metal-additive manufacturing materials has
Researchers at Lawrence Livermore National Laboratory (LLNL) are seeking to address the drawbacks of laser beams traditionally used in metal 3D printing. By exploring alternative shapes to the Gaussian beams
SmarTech Analysis has some bold numbers for the metal additive manufacturing (AM) market. The leading firm dedicated to 3D printing market analysis and consulting has projected that the segment for
The latest sign of maturation in the industrial 3D printing sector is a major new venture capital fund. The €100 million fund is the first of its kind dedicated to
NASA‘s renewed efforts to return humans to the moon by 2024 has led to advances in new space technologies to improve processes, and reduce costs and development time. In early
The evolving metal powder marketplace: Total solutions, vertical integrations and start-up innovations This is a challenging and exciting time for producers of metal powders. Talk of the industrialisation of Additive
NASA has selected 17 U.S. companies for 20 partnerships to mature industry-developed space technologies for the Moon and beyond through the Space Technology Mission Directorate’s 2020 Announcement of Collaboration Opportunity (ACO). The selected
The U.S. Air Force Rapid Sustainment Office (RSO) has announced the conclusion of its first Advanced Manufacturing Olympics (AMO), with five technical design challenge winners and a total of nearly
thyssenkrupp marked a milestone today with the formalization of its partnership with Wilhelmsen Ships Services, one of the largest maritime services providers in the world, in an official signing ceremony.
Ceramic 3D printing has always been a popular application of additive manufacturing, yet still on the relative margins when compared to thermoplastics or metals. Naturally, metals and plastics are quite
WASHINGTON: Not a lot of money is at stake in the Air Force’s Advanced Manufacturing Olympics (AMO) competition in October, but the winners will secure ground-floor spots in the service’s
On its first launch, NASA‘s uncrewed Space Launch System (SLS) mega-rocket will go on a trip around the Moon as part of the initial test flight for the Artemis 1
For the past two years, officials and teams from Formula 1 have negotiated to come up with a new set of regulations for the 2021 racing season. Among the many
Elementum 3D, Erie, Colorado, USA, and Masten Space Systems, Mojave, California, USA, have completed successful hot fire testing of their jointly-developed PermiAM metal additively manufactured fuel injector, part of the
With a record market cap, Tesla is among the automakers that are best positioned to get through the COVID-19 crisis. The recent – possibly a bit uncalled for – tweets
Materials science and metallurgy experts helping you redefine what’s possible.
Copyright © 2024 Elementum – All rights reserved
Patrick Callard earned a B.B.A. in advertising from Western Michigan University in 1990. He provides over 30 years of experience in marketing communications, new business development and market outreach.
He has managed multiple marketing projects and budgets for a variety of services and products.
Patrick also successfully grew an IT consulting business from a two-man basement business to a profitable eight employee business in 4-years. Patrick’s daily focus is to unify customer experience, brand purpose, creative communication, and marketing technology to drive the growth of the business.
Tyler’s message will key on blown powder Directed Energy Deposition (L-DED) for AM and repair and why this process is being realized by industry as one of the key pillars in printing thin wall part structures and large part envelope requirements.
Shawn will reveal how Lithography-based Ceramic Manufacturing (LCM) is producing high resolution, high performance technical ceramics that can serve a wide range of applications and structural materials, such as alumina, zirconia, and silicon nitride. He will also touch on how LCM has progressed into multi-material components incorporating ceramics and metals.
Jeff’s presentation will focus on the advances in wire DED, including welding processes for wire DED (arc, laser, and e-beam), next-generation alloys for large format metal 3D printing, and use cases that can benefit from replacing large forgings, replacing large machined billets, and producing advanced tooling — enabling next generation designs.
Dr. Jacob Nuechterlein is the founder and president of Elementum 3D in Erie, CO. He earned his Bachelor of Engineering, Master of Science, and Doctor of Philosophy at the Colorado School of Mines. Jacob has been researching, teaching, or consulting on topics such as casting and powder metallurgy for the last 14 years. Elementum 3D’s work with powder bed laser additive manufacturing is based on these principles. In addition, is thesis work in thermodynamics and formation kinetics of metal matrix composites is directly related to all 3D printing processes.